Senior Lecturer and Vice-Chancellor’s Research Fellow
I am a Senior Lecturer and Vice-Chancellor’s (VC) Research Fellow in the School of Engineering at University of Sunderland and have been working in academia and industry for more than 15 years.
Before joining the University, I worked at Newcastle National College Group – NCG, UK as a Programme Leader in Engineering and at The Open University (OU), UK as an Honorary Associate (Researcher) in the Department of Engineering and Innovation. I was also a Research Candidate at OU for MPhil leading to PhD on fully-funded studentships by Rolls Royce Limited, East Midlands Development Agency (EMDA), and OU.
Previously, I was a full-time Lecturer and Assistant Professor at NED University of Engineering and Technology, Pakistan.
I did my PhD in Materials Engineering from the Department of Engineering and Innovation, OU, Masters (MEng) in Structural Engineering, and Bachelor (BEng) in Civil Engineering at NED University.
I have a Postgraduate Certificate of Education (PGCE) in Mathematics and Numeracy Specialists from Teesside University, UK. I am also a Senior Fellow of the Higher Education Academy (SFHEA) and recognised as a Chartered Engineer (CEng).
Teaching and supervision
I am module leader of the BEng final year project module for on-campus and all TNE (transnational education) centres in Hong Kong, Malaysia, Vietnam, and Sri Lanka.
I teach modules including mechanical technology, applied mechanics, engineering mechanics, engineering mathematics, and digital design principles.
In my previous experience, I have also taught modules such as structure analysis and design, applied mathematics, and engineering materials.
I supervise postgraduate and undergraduate degree final-year projects of students in the UK and in our overseas partner institutes in Malaysia and Africa.
Research interests for potential research students
I am open to accepting applications for self-funded postgraduate research (MPhil/PhD and Visiting Scholars) with a focus on additive manufacturing and 3D printing, with a specific emphasis on engineering materials characterisations, the study of residual stresses for metal parts, and a deep exploration into the domains of structural engineering and mechanics of solids.
Publications
Article
Hossain, Mohammad Sayeed, Al Harthy, Tariq, Naveed, Nida and Garza, Carlos (2024) Development of accurate contour residual stress measurement technique for sustainable structural integrity assessment in additive manufacturing. Journal of Physics: Conference series, 2811 (012033). ISSN 1742-6596
Khan, Salman, Khadija, Khadija, Junaid, Massab, Shehbaz, Tauheed, Khan, Fahd Nawaz and Naveed, Nida (2024) Evaluation of nano indentation behavior of TIG, MIG and diffusion bonded Inconel 718 and austenitic Stainless Steel 316L joint interface. Materials Letters, 371. ISSN 0167-577X
Farooq, Sheikh Aamir, Mukhtar, Sheikh Haris, Raina, Ankush, Ul Haq, Mir Irfan, Md Irfanul, Haque Siddiqui4, Naveed, Nida and Dan, Dobrota (2024) Effect of TiB2 on the Mechanical and Tribological Properties of Marine Grade Aluminum Alloy 5052: An Experimental Investigation. Journal of Materials Research and Technology, 29. pp. 3749-3758. ISSN 2214-0697
Naveed, Nida and Anwar, Muhammad Naveed (2024) Optimising 3D Printing Parameters through Experimental Techniques and ANOVA-Based Statistical Analysis. SPE Polymers. ISSN 2690-3857
Armstrong, Mark, Ahmad Mehrabi, Hamid, Naveed, Nida and Gregg, Carl (2023) Evaluating energy consumption in atomic diffusion additive manufacturing versus sand casting. Journal of Engineering and Technological Advances (JETA), 8 (1). pp. 46-65. ISSN 2811-4280
Armstrong, Mark, Hamid, Mehrabi and Naveed, Nida (2022) An overview of modern metal additive manufacturing technology. Journal of Manufacturing Processes, 84. pp. 1001-1029. ISSN 1526-6125
Armsrong, Mark, Ahmad Mehrabi, Hamid and Naveed, Nida (2022) An overview of modern metal additive manufacturing technology. Journal of Manufacturing Processes, 84. pp. 1001-1029. ISSN 1526-6125
Oladapo, Bankole, Kayode, Joseph, Karagiannidis, Panagiotis, Naveed, Nida, Ahmad Mehrabi, Hamid and Ogundipe, Kolawole (2022) Polymeric composites of cubic-octahedron and gyroid lattice for biomimetic dental implants. Materials Chemistry and Physics, 289. ISSN 0254-0584
Elhazmiri, Badr, Naveed, Nida, Anwar, Naveed and Ul Haq, Mir Irfan (2022) The role of additive manufacturing in industry 4.0: An exploration of different business models. Sustainable Operations and Computers, 3. pp. 317-329. ISSN 2666-4127
Rouf, Saquib, Malik, Abrar, Raina, Ankush, Haq, Mir Irfan Ul, Naveed, Nida, Zolfagharian, Ali and Bodaghi, Mahdi (2022) Functionally Graded Additive Manufacturing for Orthopedic applications. Journal of Orthopaedics, 33 (11). pp. 70-80.
Wu, Haishang, Ahmad Mehrabi, Hamid, Naveed, Nida and Karagiannidis, Panagiotis (2022) Impact of strategic control and supply chain management on recycled plastic additive manufacturing. Journal of Cleaner Production, 364. ISSN 0959-6526
Naveed, Nida (2022) Additive manufacturing technologies: industrial and medical applications. Sustainable Operations and Computers.
Nikkhah, Hamid, Naveed, Nida, Assaedi Beiragh, Roghaiyeh, Dadashzadeh, Sina and Tri Truong, Quang (2022) Crashworthiness investigation of draw bead in Aluminum tubes under axial loading condition. International Journal of Protective Structures (15). pp. 1-15.
Haishang, Wu, Ahmad Mehrabi, Hamid, Naveed, Nida and Karagiannidis, Panagiotis (2022) A Business Model for Additive Manufacturing of Recycled Plastics towards Sustainability. The International Journal of Advanced Manufacturing Technology. ISSN 1433-3015
Atkinson, Callum, Naveed, Nida, Haq, Mir Irfan Ul and Ahmad Mehrabi, Hamid (2022) High Cyclic Fatigue Behaviour of Varied Pitch Compression Springs for Automotive Applications. Journal of Robotics and Mechanical Engineering, 1 (1). ISSN 2770-4122
Rouf, Saquib, Raina, Ankush, Ul Haq, Mir Irfan, Naveed, Nida, Jeganmohan, Sudhanraj and Farzana Kichloo, Aysha (2022) 3D Printed Parts and Mechanical Properties: Influencing Parameters, Sustainability Aspects, Global Market Scenario, Challenges and Applications. Advanced Industrial and Engineering Polymer Research.
Wu, Haishang, Ahmad Mehrabi, Hamid, Karagiannidis, Panagiotis and Naveed, Nida (2021) Additive manufacturing of recycled plastics: Strategies towards a more sustainable future. Journal of Cleaner Production, 335. p. 130236. ISSN 0959-6526
Fasuludeen Kunju, Firoz khan, Naveed, Nida, Anwar, Muhammad Naveed and Haq, Mir Irfan Ul (2021) Production and Maintenance in Industries: Impact of Industry 4.0. Industrial Robot. ISSN 0143-991x
Rouf, Saquib, Raina, Ankush, Ul Haq, Mir Irfan and Naveed, Nida (2021) Sensors and Tribological Systems: Applications for Industry 4.0. Industrial Robot. ISSN 0143-991x
Naveed, Nida (2021) Characterisation of short-length scale residual stress variations within an Electron Beam Welded P91 Ferritic–Martensitic Steel Plate. Heliyon, 7 (5). e07045. ISSN 2405-8440
Naveed, Nida (2021) Investigating the Material Properties and Microstructural Changes of Fused Filament Fabricated PLA and Tough-PLA Parts. Polymers, 13 (9). p. 1487. ISSN 2073-4360
Khatib, S A, Naveed, Nida and Anwar, N (2020) The Study of Diverse Personalities that Hinder Harmony across Engineering Team. Journal of Biogeneric Science and Research, 5 (1). pp. 1-11. ISSN 2692-1081
Naveed, Nida (2020) Investigate the effects of process parameters on material properties and microstructural changes of 3D printed specimens using Fused Deposition Modelling (FDM). Materials Technology: Advance Performance Materials, ahead. p. 1. ISSN 1066-7857
Naveed, Nida (2020) Guidelines to select suitable parameters for contour method stress measurements. Archives of Mechanics, 72 (1). pp. 39-58. ISSN 0373-2029
Naveed, Nida and Whitford, Michael (2019) Design Analysis of Bicycle Brake Disc for Carbon Fibre - Lightweight Material. The International Journal of Integrated Engineering, 11 (8). pp. 91-109. ISSN 2229-838X
Naveed, Nida (2019) Design and Analysis of a Disc Brake Rotor for Optimal Performance in Racing. World Journal of Modelling and Simulation. ISSN 1746-7233
Naveed, Nida (2018) Experimental Study of the Effects of Wire EDM on the Characteristics of Ferritic Steel, At a Micro-Scale on the Contour Cut Surface. Metallurgical Research & Technology, 115 (4). pp. 1-11. ISSN 2271-3646
Naveed, Nida (2017) Deformation Characterisations for the WEDM Contour Cut Surfaces. International Journal of Robotics and Mechatronics, 4 (1). pp. 22-32. ISSN 2288-5889
Javadi, Y, Smith, MC, Abburi Venkata, K, Naveed, Nida, Forsey, AN, Francis, JA, Ainsworth, RA, Trueman, CE, Smith, DJ, Hosseinzadeh, F, Gungor, S, Bouchard, PJ, Dey, HC, Bhaduri, AK and Mahadevan, S (2017) Residual stress measurement round robin on an electron beam welded joint between austenitic stainless steel 316L(N) and ferritic steel P91. International Journal of Pressure Vessels and Piping, 154. pp. 41-57. ISSN 0308-0161
Book Section
Naveed, Nida and Anwar, Muhammad Naveed (2024) Sustainable Manufacturing through Digital Multi-Material 3D Printing. In: 2024 29th International Conference on Automation and Computing (ICAC). IEEE, pp. 1-5. ISBN 979-8-3503-6088-2
Armstrong, Mark, Hamid, Mehrabi and Naveed, Nida (2023) Environmental Impact of Metal Additive Manufacturing. In: 3D Printing and Sustainable Product Development. CRC Press, Taylor and Francis, Boca Raton, pp. 61-86. ISBN 9781003306238
Wu, Haishang, Naveed, Nida and Hamid, Mehrabi (2023) How 3D-Printing achieves Sustainability. In: 3D-Printing and Sustainable Product Development. CRC Press, Taylor and Francis, pp. 21-37. ISBN 9781003306238
Gupta, Vivudh, Singh, Pawandeep and Naveed, Nida (2023) Epoxy based Nanocomposites: Tribological Characteristics and Challenges. In: Nanomaterials for Sustainable Tribology. CRC Press - Taylor Francis, pp. 1-11. ISBN 9781003306276
Conference or Workshop Item
Naveed, Nida (2023) Optimising Fused Deposition Modelling (FDM) Parameters for Enhanced Mechanical Properties of 3D Printed Parts. In: The 8th European Congress on 3D Printing and Additive Manufacturing, 02-03 Oct 2023, Amsterdam, Netherlands.
Naveed, Nida (2023) Effect of Continuous Carbon Fiber Reinforcement on the Tensile Properties of Onyx Components Printed by Fused Deposition Modelling (FDM) Technology. In: 15th International Conference on Materials Processing and Characterization, 05 - 08 Sep 2023, Northumbria University, UK.
Naveed, Nida (2023) A Study on the Effect of Concentric Fiber Layers on the Mechanical Properties of Onyx Reinforced with Continuous Fiberglass. In: The BSSM’s 17th International Conference on Advances in Experimental Mechanics, 28-30 Aug 2023, University of Glasgow, Glasgow, Scotland.
Armstrong, Mark, Ahmad Mehrabi, Hamid, Naveed, Nida and Gregg, Carl (2022) Comparison Analysis of Energy Consumption of Atomic Diffusion Additive Manufacturing with Sand Casting: Towards a more Sustainable Future. In: International Conference on Sustainable Engineering & Advanced Technology (ICSEAT2022), 16 17 June 2022, SEGi University.
Haishang, Wu, Ahmad Mehrabi, Hamid, Karagiannidis, Panagiotis and Naveed, Nida (2022) Sustainable Manufacturing by Home Based 3D Printing. In: International Conference on Sustainable Engineering & Advanced Technology (ICSEAT2022), 16 17 June 2022, SEGi University.
Naqvi, Shenela, Naveed, Nida, Ahmed Siddiqui, Afshan and Afshan, Amber (2021) Sustainable Materials for Engineering Applications. In: 1st International Conference on Advances in Material Sciences and Environmental Engineering, 21-23 June 2021, NED University Of Engineering & Technology, Pakistan.
Naveed, Nida (2019) Residual Stress Prediction of an Electron Beam Welded P91 Ferritic–Martensitic Steel Plate using the Contour Method. In: 14th International Conference on Advances in Experimental Mechanics, 10-12 Sep 2019, Belfast, Northern Ireland.
Naveed, Nida, Hosseinzadeh, F, Kowal, J and Bouchard, PJ (2017) Residual stress characterisation of a dissimilar metal electron beam welded plate using the contour method. In: BSSM 12th International Conference on Advances in Experimental Mechanics, 29th August 2017- 31st August 2017, University of Sheffield, Sheffield, UK.
Naveed, Nida (2013) Residual Stress Measurement in a Stainless Steel Clad Ferritic Plate Using the Contour Method. In: ASME 2013 Pressure Vessels and Piping Conference, July 14-18, 2013, Paris, France.
Naveed, Nida (2008) Role of U-shaped anchorages on behaviour of RC beams strengthened by CFRP plates. In: Fourth International Conference on FRP Composites in Civil Engineering (CICE2008), 22-24July 2008, Zurich, Switzerland.
Naveed, Nida (2008) Damage model for normal & high strength concrete. In: International RILEM Symposium on Concrete Modelling - ConMod '08, 26-28 May 2008, Delft, The Netherlands.
Book
Ul Haq, Mir Irfan, Ankush, Raina and Naveed, Nida (2023) 3D Printing and Sustainable Product Development. CRC Press, Taylor and Francis. ISBN 9781003306238
My research expertise covers additive manufacturing (AM), material science, advanced materials characterisation, and the study of residual stresses and mechanics of solids.
I have been actively engaged in various AM technologies commonly known as 3D printing and rapid manufacturing such as fused deposition modelling (FDM), stereolithography (SLA), and atomic diffusion additive manufacturing (ADAM). My research spans a wide array of materials, including polymers, composites, and metal alloys, with a particular focus on applications in the aerospace, automotive, and medical industries.
Current PhD projects
- Project title: The characteristics of Atomic Diffusion Additive Manufacturing
- Project title: The optimisation of thermal management techniques for high-power surface-mounted LED illuminators that involve exploring various heat sink designs, materials, and manufacturing techniques